Create by House Wortham and friends
House Wortham was selected to make the first four Order of Defense Medallions for Northshield. Three for the premieres of the Order, and one Legacy.
We started by perusing images of extant enameled jewelry from the later Middle Ages and Renaissance.
Many of the later-period images we could find represented basse taille enameling.This beautiful technique requires skilled carving of the base metal before carefully placing glass in the correct areas.
Musée national du Moyen Âge, France. Medallion with the bull of St Luke. Translucent enameling on basse-taille silver, Catalunya, second half of the 14th century. Credit line: Bequeathed by François-Achille Wasset, 1906. Accession no. Cl. 14719
Based on our collective experience, we elected to use champlevé and cloisonné enamel. Champlevé is the practice of creating wells in the metal surface for laying in glass. Cloisonné is bending tiny wires of silver which are fused to the surface of the metal to make wells. These styles were used throughout the SCA periods, but occur in higher concentrations before the fourteenth century.
Champlevé is removing metal from the piece to create wells for the glass to lay in. It can be carved away or etched away; some artists fuse a pierced sheet of silver to a flat piece.
Victoria and Albert Museum, England. Plaque. Copper-gilt, champlevé enamel; Aragon, Spain, 1420. Credit Line: Given by Dr W.L. Hildburgh. Museum number: M.25-1954
Cloisonné is the application of fine bent wires to a base of glass. The rectangular wires are .25 mm wide and 1 mm tall. The ground glass used for the enamel is shipped in grades of fineness. The glass is laid in place onto a pure metal foundation with water and capillary action. The foundation is put in the kiln at 1450° for two and a half minutes to fuse the glass into one solid piece.
Metropolitan Museum of Art, New York. Four Enamel Plaques. Cloisonné enamel, silver-gilt, jewels; French, ca. 1300. Credit Line: Gift of J. Pierpont Morgan, 1917. Accession Number: 17.190.595a-d.
With milling off the table, we moved to bending the cloisonné wire. Baron Robin devised a simplified design for the cloisonné that still read as a rapier visually. You can see the completed and set cloisonne piece on the table. The piece in process has a layer of base glass on it. Then the bent cloisonnes are glued into place with an enamel adhesive, because the surface of the metal is domed.
On this piece, the fine particles of yellow glass bled over into the black glass and blurred the clean lines of the design.Since this piece was sadly removed from circulation, we used it to test the application of the laurel- shaped copper wire. Laying the copper onto the fused glass and firing worked to sink the wreath into the glass just enough to secure it in place.
Here, you can also see more design adaptations created by Duchess Anne. In this piece, some of the cloisonné wires fell over in the kiln and fused out of place. The pock marks in the glass around the wires were made when we tried to pry the wires out of the molten glass. The surface tension was too high for the tools we had available.
This setting is marked in two places where the solder flowed up the bezel, preventing the bezel from forming a neat, smooth line around the set piece.
This bezel setting melted in two placed. The limitations of our shop required us to use two torches to heat the large silver setting enough for the solder to flow (technically, it’s “brazing” instead of soldering). There was a learning curve to getting two torches to work in concert. Both of these pieces will be scrapped and recycled.
For the legacy medallion we wanted to swords to be boldly visible, planning on gilding the silver with gold. We sought the assistance of Master Danr to learn about etching the metal to make champlevé. From there, Master Viði and Lord Oswald succeeded with electro-etching in ferric nitrate. Master Geoffrey, The Honorable Lord Robin, Lord Oswald, and Dame Marwen developed the design for etching. Dame Marwen cut resists from vinyl which we applied to the fine silver so only parts of the silver would be removed.
The cloisonné and enamel were made by Baroness Ellen, Dame Marwen, Baroness Gunnora, Baron Richard, Baroness Ainesleah, Baron Robin, Duchess Anne, Baron Geoffrey, Baroness Claire, Baron David, Countess Guenievre, Baroness Amalia, Baroness Ekaterina, Baroness Euriaut, Lady Aneka, Lord Oswald, Sayyeda al-Kaslaania.
In addition to the people already named, the following individuals supplied moral, technical, spiritual, and financial support. Lord Malcolm, young Zane Malcolmson, young Garrett Malcolmson, Lord Njall, Lord Phillip, Lady Marion, Baroness Cassandra, Master Cadwallon, Baroness Angelina, Baroness Siobhan, Duchess Petranella, Master Danr, The Honorable Lady Thuri, Master Peter, Baroness Ivetta.